Construction and Manufacturing

Group of Companies

VESTT-900011 Single-Axle Platform Semitrailer

Intended use

Single-axle platform semitrailer is designed for the transportation of various loads along the general-purpose highways with hard covering.

The main towing trucks are tractor units like MAZ-64229, KAMAZ-54115 or other with the height of truck bolster no more than 1250 mm.


Characteristics Value
Payload, kg 17000
Curb weight, kg 5000
weight 22000

Load distribution by full weight, kgс:

  • through a trailer hitch
  • through the tires of wheels



Overall dimensions, mm:

  • Length
  • Width
  • Height
  • Height when loaded, mm (max)
  • Truck bed height, mm



Wheelbase, mm 9100
Ground clearance, mm (min) 350



The fabricated structure is made of low alloy carbon steels. Side members are made in the form of the welded I beam (steel 09G2S). Cross members are solid (continuous) made of steel sheet in the form of roll-formed channel, passed through the holes in the side members, and welded on. A support plate near the pivot is made of 10 mm thick steel sheet (09G2S). There is a coupling pin diameter of 2” installed on the semitrailer, the pivot is fixed using 8 M14 bolts, with the strength category of 10.9.


There is a 4 mm flooring made of the steel ribbed sheet on the platform. The platform is equipped with clips for the fastening of a load.


It consists of 1 axle (manufactured by VESTT AS) on the air suspension.

Doubled wheels, disk-type, attached to the hub with М22х1,5 screws (GOST 8918-70). The number of wheels, including the spare extra wheel, is 5 pcs.

Tires are pneumatic, tubeless 235/75R17,5.

Braking System

It works upon all wheels. Drum-type brake gears with ABS. The parking brake is a spring brake.

Trailer Landing Gear

Two-speed mechanical hand-driven (like JOST or HAACON).

Electrical Equipment

Single-wire powered from the towing truck current source. The number, place, and colour of the external lighting devices meet the requirements of DSTU UN/ECE R48-02.


– rear-wheel splash guards;

– two wheel chocks.


There are two layers of MS-17 enamel after a layer of MS-067 precoating, the colour is blue (any colour is possible at the customer’s request).


For cooperation, contact us in any convenient way for you

    Request a call back
    You will be contacted within an hour

      Request a call back
      You will be contacted within an hour